{"product_id":"2015-2019-challenger-rear-driveshaft-v6-3-6l","title":"2015-2019 Challenger Rear Driveshaft for Dodge Challenger V6 3.6L – 71.7-73.2 in Prop Shaft, Replaces 976-987, 976987, 52123974AC\/AD\/AE\/AF","description":"\u003ch2\u003e2015-2019 Challenger Rear Driveshaft for Dodge Challenger V6 3.6L\u003c\/h2\u003e\n\u003cp\u003eThis 2015-2019 Challenger rear driveshaft is a complete rear prop shaft assembly listed for the Dodge Challenger with the 3.6L V6 engine. It measures 71.7 to 73.2 inches (1820 to 1860 mm) in length and is listed under reference numbers 976-987, 976987 and 52123974AC through 52123974AJ. Easy Life Markets offers it as a fully assembled replacement for owners and workshops who need to replace a worn, noisy or damaged rear driveshaft without rebuilding the old one.\u003c\/p\u003e\n\n\u003cp\u003eOn a rear-wheel-drive car like the Challenger, the rear driveshaft carries engine power from the transmission output to the rear differential. It spins at high speed, has to stay in balance, and must cope with small changes in length and angle as the rear suspension moves. It does this with universal joints (U-joints) and a slip yoke. When those joints wear, the shaft can vibrate, clunk when you shift, or make noise as you pull away. Replacing the complete assembly restores all of the joints at once. You can read more about how a \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Drive_shaft\" target=\"_blank\" rel=\"noopener\"\u003edrive shaft\u003c\/a\u003e transmits power to the wheels.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Is Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x rear driveshaft (prop shaft) assembly, black finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe shaft comes fully assembled with its U-joints and slip yoke in place. According to the supplier, high-temperature grease is already applied to the slip yoke and U-joints. Mounting bolts and straps are not listed as included, so plan to reuse your existing hardware or replace it as your service information recommends.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Rear driveshaft \/ prop shaft assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft length:\u003c\/strong\u003e 71.7–73.2 in (1820–1860 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft diameters:\u003c\/strong\u003e 2.4 in (60 mm) and 3.0 in (76 mm), as listed by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoints:\u003c\/strong\u003e Universal joints with slip yoke, pre-greased with high-temperature grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalancing:\u003c\/strong\u003e The supplier states each assembly is dynamically balance tested before it leaves the factory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference numbers:\u003c\/strong\u003e 976-987, 976987, 52123974AC, 52123974AD, 52123974AE, 52123974AF, 52123974AG, 52123974AI, 52123974AJ, and 2123974AH (as written in the supplier listing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Unbranded aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CJFU26601380001\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe supplier lists this rear driveshaft for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDodge Challenger, 2015–2019, with the 3.6L V6 engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Challenger was sold with several engines, transmissions and drivetrain layouts over these years, and the rear driveshaft is not the same on every version. The listing is for the V6 3.6L only. Before you order, please check these points:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the part number\u003c\/strong\u003e on your old shaft, on your parts invoice, or in a Mopar parts catalogue using your VIN, and compare it with the numbers above.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure your old shaft\u003c\/strong\u003e and confirm it falls within the 71.7–73.2 in (1820–1860 mm) range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompare the ends\u003c\/strong\u003e of your shaft with the product photos to confirm the flange and yoke style match.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf you are not sure, \u003ca href=\"\/pages\/contact\"\u003econtact us with your VIN\u003c\/a\u003e and the number from your old part, and we will help you check before you buy.\u003c\/p\u003e\n\n\u003ch2\u003eSigns Your Rear Driveshaft Needs Replacing\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVibration felt through the floor or seat that gets worse with speed\u003c\/li\u003e\n\u003cli\u003eA clunk when shifting from park into drive or reverse, or when you get on and off the throttle\u003c\/li\u003e\n\u003cli\u003eSqueaking or chirping from under the car at low speed, often from a dry U-joint\u003c\/li\u003e\n\u003cli\u003eVisible play when you twist the shaft by hand with the car safely supported\u003c\/li\u003e\n\u003cli\u003eRust, dents or a bent tube after road debris or an impact\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA worn rear differential, transmission mount or wheel bearing can cause similar symptoms, so it is worth inspecting the whole driveline before replacing parts.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePark on level ground, put the transmission in park or neutral as your service manual directs, and support the car securely on stands.\u003c\/li\u003e\n\u003cli\u003eMark the position of the shaft on the differential flange before removal so you can check alignment later.\u003c\/li\u003e\n\u003cli\u003eSupport the shaft while you undo the bolts so it does not drop or pull on the transmission seal.\u003c\/li\u003e\n\u003cli\u003eClean the mating surfaces, fit the new shaft, and tighten every bolt to the torque figure in your service information.\u003c\/li\u003e\n\u003cli\u003eCheck the transmission fluid level after fitting, as a little may escape when the slip yoke is removed.\u003c\/li\u003e\n\u003cli\u003eRoad test at different speeds and listen for vibration or noise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe driveshaft is part of the drivetrain, so professional installation is recommended if you do not have experience with this type of work or do not have proper lifting equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Complete Driveshaft Assembly\u003c\/h2\u003e\n\u003cp\u003eRebuilding a driveshaft means pressing out old U-joints, sourcing new ones and then having the shaft balanced again. A complete 2015-2019 Challenger rear driveshaft arrives assembled, which saves time and avoids the vibration that can follow a rebuild done without balancing equipment. It also replaces all of the moving joints at once, rather than just the one that failed first.\u003c\/p\u003e\n\n\u003ch2\u003eCaring for Your New Driveshaft\u003c\/h2\u003e\n\u003cp\u003eAfter installation, check the shaft whenever the car is raised for an oil change or tyre rotation. Look for grease leaking from the U-joints, damage to the tube, and loose bolts. Avoid hard launches from a standstill if you want the joints to last longer, as sudden torque puts high loads on every part of the driveline. If you notice a new vibration or clunk, have it checked early, before a worn joint damages other components. The \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Universal_joint\" target=\"_blank\" rel=\"noopener\"\u003euniversal joint\u003c\/a\u003e article explains why joint angles and wear matter.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Rear Driveshaft Is For\u003c\/h2\u003e\n\u003cp\u003eThis rear driveshaft suits owners of a 2015–2019 Dodge Challenger V6 3.6L, independent repair shops and DIY mechanics who have confirmed that their car uses one of the reference numbers listed above and that their shaft length is in the listed range.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a genuine Mopar or Dodge part?\u003c\/strong\u003e No. It is an unbranded aftermarket driveshaft sold under the reference numbers listed above. It is not a genuine part of the vehicle maker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit V8 Challenger models?\u003c\/strong\u003e The supplier lists it for the V6 3.6L only. Other engine versions may use a different driveshaft, so check your part number before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to grease it before fitting?\u003c\/strong\u003e The supplier states the slip yoke and U-joints are pre-greased. Follow your service manual for any lubrication at the slip yoke during fitting.\u003c\/p\u003e\n\n\u003ch2\u003eBuy the 2015-2019 Challenger Rear Driveshaft at Easy Life Markets\u003c\/h2\u003e\n\u003cp\u003eYou can order this rear prop shaft directly from this page. The current price and availability are shown on this page. Please read our \u003ca href=\"\/pages\/return-refund-policy\"\u003ereturn and refund policy\u003c\/a\u003e before buying, and check your part number and shaft length first so you get the right part the first time.\u003c\/p\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/2007-2008-ford-edge-rear-driveshaft-lincoln-mkx\"\u003eFord Edge rear driveshaft for 2007–2008 Ford Edge and Lincoln MKX\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/52853431aa-front-driveshaft-jeep-commander-grand-cherokee\"\u003e52853431AA front driveshaft for Jeep Commander and Grand Cherokee\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/heavy-duty-yoke-puller-class-6-8-trucks\"\u003eheavy duty yoke puller\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse our \u003ca href=\"\/collections\/driveshafts\"\u003edriveshafts collection\u003c\/a\u003e, \u003ca href=\"\/collections\/transmission-drivetrain\"\u003etransmission and drivetrain parts\u003c\/a\u003e and \u003ca href=\"\/collections\/auto-parts\"\u003eauto parts\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Photos\u003c\/h2\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/17661024\/f06b2b6f-dd2f-4184-a9a9-c4e351c15ed0.jpg\" alt=\"2015-2019 Challenger rear driveshaft assembly\" style=\"max-width:100%;\"\u003e\n\u003c\/p\u003e","brand":"easylife markets","offers":[{"title":"black","offer_id":46972058009761,"sku":"CJFU26601380001","price":1278.4,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/2086\/9537\/files\/282e1cd3-c2a7-4e43-bedf-a449c73b403b.jpg?v=1788595123","url":"https:\/\/easylifemarketplace.com\/products\/2015-2019-challenger-rear-driveshaft-v6-3-6l","provider":"Easy Life Markets","version":"1.0","type":"link"}