{"product_id":"aluminum-spark-plug-cover-engine-harness","title":"Aluminum Spark Plug Cover – Engine Harness Cover for the Engine Housing, Aluminum Alloy, With or Without Holes, Blue, Red or Silver","description":"\u003ch2\u003eAluminum Spark Plug Cover for the Engine Harness – With or Without Holes\u003c\/h2\u003e\n\u003cp\u003eThis aluminum spark plug cover is a ribbed trim plate that bolts onto the top of a four-cylinder engine housing, over the row of spark plug wells where the ignition harness runs. It is made from aluminum alloy, measures 36.5 cm long by 5.3 cm wide in the supplier's dimension photo, and comes in blue, red or silver, each with or without holes. Easy Life Markets sells it as a single piece for owners who want to tidy up the centre of the valve cover or replace a faded or missing plastic one.\u003c\/p\u003e\n\n\u003cp\u003eThe supplier's own name for the part is an engine harness cover for the engine housing, and its packing list simply says \"Hood x 1\". The product photos make its purpose clearer. One shows the silver version with holes fitted in the recess along the middle of a four-cylinder valve cover, with one opening above each plug well. On engines laid out this way the plug leads or coils drop down through that channel to reach each \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Spark_plug\" target=\"_blank\" rel=\"noopener\"\u003espark plug\u003c\/a\u003e, and the cover closes the channel over them.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Receive\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x aluminum alloy cover in the colour and style you choose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBolts, washers and seals are not listed by the supplier, so plan to reuse the fasteners from your existing cover.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 36.5 cm, from the supplier's dimension photo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 5.3 cm, from the supplier's dimension photo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole diameter (with-hole version):\u003c\/strong\u003e 2.3 cm, from the supplier's dimension photo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting tabs:\u003c\/strong\u003e Four, each marked 1.6 cm in the supplier's dimension photo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositions:\u003c\/strong\u003e Four in a row, for a four-cylinder layout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Ribbed top face, as shown in the product photo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Blue, red, silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyles:\u003c\/strong\u003e With holes, without holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Unbranded aftermarket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eOptions and SKUs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo Hole Blue – CJYD188055104DW\u003c\/li\u003e\n\u003cli\u003eNo Hole Red – CJYD188055105EV\u003c\/li\u003e\n\u003cli\u003eNo Hole Silver – CJYD188055106FU\u003c\/li\u003e\n\u003cli\u003eWith Hole Blue – CJYD188055101AZ\u003c\/li\u003e\n\u003cli\u003eWith Hole Red – CJYD188055102BY\u003c\/li\u003e\n\u003cli\u003eWith Hole Silver – CJYD188055103CX\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWith Holes or Without?\u003c\/h2\u003e\n\u003cp\u003eThis is the choice that matters most, so it is worth a minute.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWith holes.\u003c\/strong\u003e There are four round openings, each about 2.3 cm across, one above each plug position. Choose this style if something has to pass up through the cover on your engine, such as plug leads coming out of the top of the valve cover. The installed photo shows this version.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWithout holes.\u003c\/strong\u003e The top face is solid, with the same ribbed pattern running the full length. Choose this style only if nothing needs to come through the cover on your setup, for example where the leads or coil wiring leave from the end of the channel. If you fit a solid cover and your leads need to exit upward, it will not go on.\u003c\/p\u003e\n\u003cp\u003eIf you are not sure which way your leads run, lift your current cover and look before you order.\u003c\/p\u003e\n\n\u003ch2\u003eChecking It Will Fit Your Engine\u003c\/h2\u003e\n\u003cp\u003eThe supplier does not name a vehicle or an engine for this part. That is a real limitation, and we would rather tell you than guess. The cover is shaped for one particular four-cylinder valve cover, so please measure yours first:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the recess\u003c\/strong\u003e in your valve cover from end to end. The new part is 36.5 cm long and 5.3 cm across the main strip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCount and locate the mounting points.\u003c\/strong\u003e This cover has four tabs, two on each side, arranged in two pairs along its length. Compare their positions with the bolt holes on your engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the plug spacing.\u003c\/strong\u003e On the with-hole version, the four openings need to line up with your plug wells.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompare with the photos.\u003c\/strong\u003e Lay your old cover next to the dimension picture and check the outline, including the shape of each end.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf you send your measurements and a photo of your valve cover through our \u003ca href=\"\/pages\/contact\"\u003econtact page\u003c\/a\u003e, we will compare them with the supplier's pictures for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWork on a cold engine. Aluminum and valve covers both hold heat for a long time.\u003c\/li\u003e\n\u003cli\u003eIf you are fitting the with-hole version, label each plug lead before you pull it so the firing order stays right, then feed the leads through the matching holes.\u003c\/li\u003e\n\u003cli\u003eWipe the recess clean so grit is not trapped under the new cover.\u003c\/li\u003e\n\u003cli\u003eStart all four bolts by hand before tightening any of them. Tighten them gently and evenly. These are small fasteners into a valve cover, and they do not need much force.\u003c\/li\u003e\n\u003cli\u003eCheck that no lead is pinched under an edge before you start the engine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo special tools are needed. If your leads or coils are awkward to remove, a mechanic can swap the cover in a few minutes during a service.\u003c\/p\u003e\n\n\u003ch2\u003eLooking After the Finish\u003c\/h2\u003e\n\u003cp\u003eWash the cover with a mild car shampoo or a damp cloth. Avoid strong alkaline degreasers and acidic wheel cleaners, which can dull a coloured finish on aluminum. Keep brake fluid off it, and wipe oil spills away when you top up, since the oil filler usually sits close by.\u003c\/p\u003e\n\n\u003ch2\u003eWho Buys This Cover\u003c\/h2\u003e\n\u003cp\u003eOwners building a tidy engine bay who want a colour-matched detail on the valve cover, people whose original plastic cover has cracked or gone missing, and workshops that dress engines for customers. It is a cosmetic and protective cover. It does not change how the engine runs.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich engine is it made for?\u003c\/strong\u003e The supplier does not say. Please use the 36.5 cm by 5.3 cm measurements and the four-tab layout to check against your own valve cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a genuine part from a vehicle maker?\u003c\/strong\u003e No. It is an unbranded aftermarket cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre bolts included?\u003c\/strong\u003e They are not listed. The supplier's packing list shows the cover only.\u003c\/p\u003e\n\n\u003ch2\u003eBuy the Aluminum Spark Plug Cover at Easy Life Markets\u003c\/h2\u003e\n\u003cp\u003ePick your colour and style above and order the aluminum spark plug cover here. The current price and availability are shown on this page. Our \u003ca href=\"\/pages\/return-refund-policy\"\u003ereturn and refund policy\u003c\/a\u003e explains your options if the cover does not suit your engine.\u003c\/p\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/civic-integra-obd1-engine-harness-1992-1995\"\u003eCivic Integra OBD1 engine harness 1992-1995\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hyundai-elantra-valve-cover-2-0l\"\u003eHyundai Elantra valve cover 2.0L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/spark-plug-crv-iridium-platinum-burner\"\u003eIridium platinum spark plug\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore parts are in our \u003ca href=\"\/collections\/engine-parts\"\u003eengine parts\u003c\/a\u003e, \u003ca href=\"\/collections\/wiring-harnesses\"\u003ewiring harnesses\u003c\/a\u003e and \u003ca href=\"\/collections\/auto-parts\"\u003eauto parts\u003c\/a\u003e collections.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Photos\u003c\/h2\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/16982784\/1717419447133802496.jpg\" alt=\"Aluminum spark plug cover with dimensions, 36.5 cm by 5.3 cm\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/16982784\/1717419447263825920.jpg\" alt=\"Red cover with holes\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/16982784\/1717419447427403776.jpg\" alt=\"Blue cover with holes\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/16982784\/1717419447637118976.jpg\" alt=\"Silver cover with holes\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/16982784\/1717419447741976576.jpg\" alt=\"Engine harness cover, additional view\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/16982784\/1717419447913943040.jpg\" alt=\"Engine harness cover, additional view\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/16982784\/1717419448052355072.jpg\" alt=\"Silver cover without holes\" style=\"max-width:100%;\"\u003e\n\u003c\/p\u003e","brand":"easylife markets","offers":[{"title":"No Hole Blue","offer_id":46973793599649,"sku":"CJYD188055104DW","price":251.84,"currency_code":"AED","in_stock":true},{"title":"No Hole Red","offer_id":46973793632417,"sku":"CJYD188055105EV","price":251.84,"currency_code":"AED","in_stock":true},{"title":"No Hole Silver","offer_id":46973793665185,"sku":"CJYD188055106FU","price":251.84,"currency_code":"AED","in_stock":true},{"title":"With Hole Blue","offer_id":46973793697953,"sku":"CJYD188055101AZ","price":253.82,"currency_code":"AED","in_stock":true},{"title":"With Hole Red","offer_id":46973793730721,"sku":"CJYD188055102BY","price":253.82,"currency_code":"AED","in_stock":true},{"title":"With Hole Silver","offer_id":46973793763489,"sku":"CJYD188055103CX","price":253.82,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/2086\/9537\/files\/0584b440-4182-423d-9580-4b209fef5cf0.jpg?v=1788633751","url":"https:\/\/easylifemarketplace.com\/products\/aluminum-spark-plug-cover-engine-harness","provider":"Easy Life Markets","version":"1.0","type":"link"}