{"product_id":"front-wishbone-rear-bushing","title":"Front Wishbone Rear Bushing – Modified Auto Parts, Black with Red Hex-Bore Inserts","description":"\u003ch2\u003eFront Wishbone Rear Bushing – Modified Suspension Bushing with Red Hex Inserts\u003c\/h2\u003e\n\u003cp\u003eThis front wishbone rear bushing is sold as a modified, or upgrade, suspension part: a black bushing with a red centre insert that has a hexagonal bore. We will be straight with you from the start. The supplier's listing is very short. It names the part, describes the style as simple and the colour as \"picture colour\", and gives no vehicle list, no part number and no dimensions. Easy Life Markets sells it on that basis, so this page explains what the part is, what the photos show, and how to find out whether it suits your car before you spend money.\u003c\/p\u003e\n\n\u003cp\u003eA wishbone is another name for a \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Control_arm\" target=\"_blank\" rel=\"noopener\"\u003econtrol arm\u003c\/a\u003e, the link that holds the bottom of the front wheel in position. On many cars the front wishbone has two inner mounting points, one towards the front and one towards the rear. The rear one sits in a bushing, and that bushing takes most of the force when you brake or hit a bump. It is usually the first bushing on the arm to wear out. When it does, the wheel can move backwards and forwards slightly, and the driver feels that as vague steering, a clunk, or a shake through the wheel under braking.\u003c\/p\u003e\n\n\u003ch2\u003eWhat the Photos Show\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo black cylindrical bushings, each with a raised flange at both ends\u003c\/li\u003e\n\u003cli\u003eA red centre insert in each bushing, with a hexagonal bore\u003c\/li\u003e\n\u003cli\u003eTwo separate red washers, each with a hexagonal hole\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe supplier's packing list reads \"Wishbone rear bushing x 1\". The pictures show two bushings and two washers together. We read that as one set as pictured, which would cover the left and right sides of one car, but the supplier does not spell it out. If the exact quantity matters to you, please ask us to confirm before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Front wishbone rear bushing, modified type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Simple\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Picture colour – black body with red inserts and red washers, as shown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore:\u003c\/strong\u003e Hexagonal, as shown in the photos\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Not stated by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Not stated by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle fitment:\u003c\/strong\u003e Not stated by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e None given\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Unbranded aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CJQT117691001AZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe would rather show you the gaps than fill them with guesses. Two-colour bushings of this look are common among uprated suspension parts, but the supplier does not say what this one is made of, so we do not claim a material.\u003c\/p\u003e\n\n\u003ch2\u003eChecking Fitment When No Vehicle Is Listed\u003c\/h2\u003e\n\u003cp\u003eBecause the supplier names no make or model, you cannot choose this part by vehicle. You can only choose it by comparison and measurement. Here is how to go about it:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentify the bushing on your car.\u003c\/strong\u003e Find the rear inner mount of the front wishbone. Note whether the bushing presses into the arm, into a separate bracket, or into the subframe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLook at the shape of the arm end or the bolt sleeve.\u003c\/strong\u003e This bushing has a hexagonal bore. It only suits an arm whose end, or a sleeve, is hexagonal to match. A round pin will not work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure the old bushing.\u003c\/strong\u003e Take the outer diameter, the length, and the distance across the flats of the hexagon.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSend us the details.\u003c\/strong\u003e Use our \u003ca href=\"\/pages\/contact\"\u003econtact page\u003c\/a\u003e to send your vehicle make, model, year and those measurements. We will help you check.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePlease do not order on appearance alone. Bushings that look alike in a photo can differ by a few millimetres, and that is enough to make one unusable.\u003c\/p\u003e\n\n\u003ch2\u003eSigns a Wishbone Rear Bushing Is Worn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA knock from the front of the car when braking, pulling away or crossing a bump\u003c\/li\u003e\n\u003cli\u003eSteering wheel shake under braking that new discs did not cure\u003c\/li\u003e\n\u003cli\u003eThe car wandering or following ruts in the road\u003c\/li\u003e\n\u003cli\u003eUneven wear on the inside edge of the front tyres\u003c\/li\u003e\n\u003cli\u003eCracked, split or oil-soaked rubber when you look at the bushing from underneath\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eStandard or Modified Bushings\u003c\/h2\u003e\n\u003cp\u003eA standard bushing is soft rubber. It is quiet and comfortable, and it lets the arm move a little under load. Modified bushings are generally made firmer so that the arm moves less. The usual result is steering that responds more directly and holds its alignment better under braking, with slightly more road noise and vibration reaching the cabin. Which you prefer depends on how you use the car.\u003c\/p\u003e\n\n\u003ch2\u003eFitting Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving an old wishbone bushing normally needs a press or a puller. Do not hammer on the arm.\u003c\/li\u003e\n\u003cli\u003eClean the housing and the arm end before fitting the new bushing, and check both for damage or corrosion.\u003c\/li\u003e\n\u003cli\u003eNote how the old bushing and any washers were arranged before you take them apart, and photograph it.\u003c\/li\u003e\n\u003cli\u003eUse the lubricant recommended for the bushing material once that has been confirmed.\u003c\/li\u003e\n\u003cli\u003eTighten all fasteners to the torque in your vehicle's service manual, with the suspension at ride height where the manual requires it.\u003c\/li\u003e\n\u003cli\u003eHave the wheel alignment checked after the work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo instructions are listed as included. Suspension bushings affect how the car steers and brakes, so if you lack the tools or experience, have a qualified mechanic fit them.\u003c\/p\u003e\n\n\u003ch2\u003eWho Should Consider This Part\u003c\/h2\u003e\n\u003cp\u003eIt is for owners and builders who already know the bushing size and style their front wishbone needs and can match it by measurement, and for workshops that modify suspension and are comfortable checking parts on the bench. If you are looking for a part to order by vehicle model alone, this listing does not give you enough to do that safely.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich car does it fit?\u003c\/strong\u003e The supplier does not say. Contact us with your vehicle and measurements and we will help you check.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e The material is not stated in the listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a genuine part from a vehicle maker?\u003c\/strong\u003e No. It is an unbranded aftermarket modified part and not a genuine part of any vehicle maker.\u003c\/p\u003e\n\n\u003ch2\u003eBuy the Front Wishbone Rear Bushing at Easy Life Markets\u003c\/h2\u003e\n\u003cp\u003eYou can order it on this page once you have confirmed it matches your car. The current price and availability are shown on this page. Please read our \u003ca href=\"\/pages\/return-refund-policy\"\u003ereturn and refund policy\u003c\/a\u003e first.\u003c\/p\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bmw-e46-control-arm-bushing-polyurethane\"\u003eBMW E46 control arm bushing set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kia-forte-lower-control-arms-2014-2018\"\u003eKia Forte lower control arms\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nissan-rogue-front-suspension-kit-10pc\"\u003eNissan Rogue front suspension kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse our \u003ca href=\"\/collections\/bushings\"\u003ebushings\u003c\/a\u003e, \u003ca href=\"\/collections\/control-arms\"\u003econtrol arms\u003c\/a\u003e and \u003ca href=\"\/collections\/suspension-steering\"\u003esuspension and steering\u003c\/a\u003e collections.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Photos\u003c\/h2\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/1623834840592.jpg\" alt=\"Front wishbone rear bushing, black with red hex inserts and washers\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/1623834840621.jpg\" alt=\"Wishbone rear bushings and red washers, view 2\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/1623834840617.jpg\" alt=\"Wishbone rear bushings standing upright with washers, view 3\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/1623834840603.jpg\" alt=\"Wishbone rear bushings and red washers, view 4\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/1623834840612.jpg\" alt=\"Wishbone rear bushings showing hexagonal bore, view 5\" style=\"max-width:100%;\"\u003e\n\u003c\/p\u003e","brand":"easylife markets","offers":[{"title":"Picture color","offer_id":46973723771041,"sku":"CJQT117691001AZ","price":212.56,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/2086\/9537\/files\/1623834846942.jpg?v=1788627675","url":"https:\/\/easylifemarketplace.com\/products\/front-wishbone-rear-bushing","provider":"Easy Life Markets","version":"1.0","type":"link"}