{"product_id":"honda-accord-3-0l-v6-motor-mount-kit","title":"Honda Accord 3.0L V6 Motor Mount Kit – Set of 6 Engine \u0026 Transmission Mounts for 2003–2007 Accord, Replaces A4526HY, A4517, A4527HY, A4524, A4544, A4525","description":"\u003ch2\u003eHonda Accord 3.0L V6 Motor Mount Kit – 6 Pieces for 2003–2007\u003c\/h2\u003e\n\u003cp\u003eThis Honda Accord 3.0L V6 motor mount kit is a six-piece engine and transmission mount set for the 2003–2007 Honda Accord with the 3.0L V6 engine. It replaces the mounts referenced as A4526HY, A4517, A4527HY, A4524, A4544 and A4525. Easy Life Markets sells the six mounts together as one kit, so you can renew all of the engine and transmission support on your Accord in one job.\u003c\/p\u003e\n\n\u003cp\u003eThe V6 Accord uses several mounts around the engine and gearbox. Some of them are hydraulic, filled with fluid to absorb vibration at idle, while others are rubber bushings in metal housings. As they age, the rubber cracks, the fluid leaks out, and vibration and clunks start to come through into the cabin. You can read more about how \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Engine_mount\" target=\"_blank\" rel=\"noopener\"\u003eengine mounts\u003c\/a\u003e work and why they wear.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Is Included\u003c\/h2\u003e\n\u003cp\u003eAccording to the supplier, the kit includes six mounts, as shown in the product photos:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x front engine mount (A4526HY)\u003c\/li\u003e\n\u003cli\u003e1 x right front engine mount (A4517)\u003c\/li\u003e\n\u003cli\u003e1 x rear engine mount (A4527HY)\u003c\/li\u003e\n\u003cli\u003e1 x transmission mount (A4524)\u003c\/li\u003e\n\u003cli\u003e1 x front upper transmission mount (A4544)\u003c\/li\u003e\n\u003cli\u003e1 x rear transmission mount (A4525)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Engine motor mount and transmission mount kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference numbers:\u003c\/strong\u003e A4526HY, A4517, A4527HY, A4524, A4544, A4525\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed vehicle:\u003c\/strong\u003e Honda Accord 3.0L V6, 2003–2007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials (supplier):\u003c\/strong\u003e Aluminum alloy, metal and rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePieces:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CJFU26532000001\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe supplier lists this kit for the 2003–2007 Honda Accord with the 3.0L V6 engine. The four-cylinder Accord uses different mounts, and mounts can also differ between automatic and manual gearbox versions and between sedan and coupe body styles. Before ordering, please compare the reference numbers and photos with your existing mounts, or check them in a Honda parts catalogue using your VIN. If you are not sure, \u003ca href=\"\/pages\/contact\"\u003esend us your VIN\u003c\/a\u003e and we will help you check.\u003c\/p\u003e\n\n\u003ch2\u003eSigns of Worn Motor Mounts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVibration at idle, especially when stopped in Drive\u003c\/li\u003e\n\u003cli\u003eA clunk when shifting into Drive or Reverse, or when accelerating\u003c\/li\u003e\n\u003cli\u003eKnocking over bumps from the engine bay\u003c\/li\u003e\n\u003cli\u003eVisible engine movement when revving\u003c\/li\u003e\n\u003cli\u003eCollapsed or cracked rubber, or fluid leaking from a hydraulic mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupport the engine and transmission securely from below before removing any mount.\u003c\/li\u003e\n\u003cli\u003eReplace one mount at a time to keep the drivetrain in position.\u003c\/li\u003e\n\u003cli\u003eTake note of the orientation of each mount before removal.\u003c\/li\u003e\n\u003cli\u003eTighten all bolts to Honda's specified torque with the weight of the engine on the mounts.\u003c\/li\u003e\n\u003cli\u003eTest drive and check for vibration in Drive, Reverse and at idle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReplacing all six mounts is a substantial job. Professional installation is recommended.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Replace the Full Set\u003c\/h2\u003e\n\u003cp\u003eAll six mounts have covered the same distance and have been exposed to the same heat. If one has failed, the others are usually worn too. A worn mount next to a new one lets the engine move more than it should, which puts extra strain on the new parts. Fitting the whole kit restores the correct engine position and gives the smoothest result.\u003c\/p\u003e\n\n\u003ch2\u003eHow to Check Your Accord's Mounts\u003c\/h2\u003e\n\u003cp\u003eWith the hood open and a helper holding the brakes firmly, start the engine and shift between Drive and Reverse, applying a little throttle in each. A small movement is normal; a sharp jump, a lift on one side or a thud points to worn mounts. Also look under the front and rear mounts for dark fluid, which is a sign that a hydraulic mount has leaked.\u003c\/p\u003e\n\n\u003ch2\u003eLooking After the New Mounts\u003c\/h2\u003e\n\u003cp\u003eOil leaks break down rubber, so fix any leaks from the valve covers or oil pan. Smooth driving also helps: avoid hard launches and quick shifts between Drive and Reverse, which load the mounts heavily.\u003c\/p\u003e\n\n\u003ch2\u003eTools and Preparation\u003c\/h2\u003e\n\u003cp\u003eBefore starting, gather a floor jack with a wide block of wood to support the engine or transmission, sturdy axle stands, a torque wrench and a good socket set. Some mounts are easier to reach with the front wheel or splash shields removed. Work on one mount at a time, and mark the position of each old mount before you remove it so the new one goes back in the same place.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Kit Is For\u003c\/h2\u003e\n\u003cp\u003eThis kit suits owners of 2003–2007 Honda Accord V6 models with vibration or clunks from worn mounts, and independent workshops that service Honda vehicles.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the four-cylinder Accord?\u003c\/strong\u003e No. This kit is listed for the 3.0L V6 only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a genuine Honda part?\u003c\/strong\u003e No. It is an aftermarket kit sold under the reference numbers above.\u003c\/p\u003e\n\n\u003ch2\u003eBuy This Accord V6 Mount Kit at Easy Life Markets\u003c\/h2\u003e\n\u003cp\u003eYou can order this six-piece motor mount kit right here. The current price and availability are shown on this page. Please read our \u003ca href=\"\/pages\/return-refund-policy\"\u003ereturn and refund policy\u003c\/a\u003e before buying.\u003c\/p\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/honda-civic-1-8l-coupe-motor-mount-kit\"\u003eHonda Civic 1.8L coupe motor mount kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/camry-2-5l-motor-mount-kit\"\u003eCamry 2.5L motor mount kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/78410-s04-901-speed-sensor\"\u003e78410-S04-901 Honda speed sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse our \u003ca href=\"\/collections\/engine-mounts\"\u003eengine mounts collection\u003c\/a\u003e, \u003ca href=\"\/collections\/transmissions\"\u003etransmission parts\u003c\/a\u003e and \u003ca href=\"\/collections\/auto-parts\"\u003eauto parts\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Photos\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/17659296\/31e9fabb-3e17-4689-aa69-11236df39a84.jpg\" alt=\"Honda Accord 3.0L V6 motor mount kit, 6 pieces\" style=\"max-width:100%;\"\u003e\u003c\/p\u003e","brand":"easylife markets","offers":[{"title":"black","offer_id":46969706086561,"sku":"CJFU26532000001","price":370.23,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/2086\/9537\/files\/e46c0da7-a8df-464d-94ce-5187752ee39b.jpg?v=1788568852","url":"https:\/\/easylifemarketplace.com\/products\/honda-accord-3-0l-v6-motor-mount-kit","provider":"Easy Life Markets","version":"1.0","type":"link"}