{"product_id":"hummer-h3-cv-axle-pair","title":"Hummer H3 CV Axle Pair 2006-2010 – Front Left \u0026 Right (Driver and Passenger) CV Joint Axles, Alloy \u0026 Carbon Steel, 15886012","description":"\u003ch2\u003eHummer H3 CV Axle Pair – Front Left and Right, 2006-2010\u003c\/h2\u003e\n\u003cp\u003eThis Hummer H3 CV axle pair is a set of two front CV axle shaft assemblies, driver side and passenger side, listed for the 2006–2010 Hummer H3. The supplier gives one reference number for the axles, 15886012, with a compressed length of 25–27.3 inches (634–694 mm), a 28-tooth external input spline and a 33-tooth external output spline. Easy Life Markets sells the two axles together, so H3 owners and 4x4 workshops can renew both sides of the front end in a single job.\u003c\/p\u003e\n\n\u003cp\u003eThe H3 sends power to its front wheels through a front differential and a CV axle on each side. Every axle has an inner joint that plunges in and out with suspension travel and an outer joint that lets the wheel steer. Both run in grease behind flexible boots. The H3 is a heavy truck that often gets used off the tarmac, and bigger tyres or a levelling kit put the joints at steeper angles than standard. That is hard on boots. Once one splits, grit gets into the joint and it does not take long before you hear it. For background, see how a \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Constant-velocity_joint\" target=\"_blank\" rel=\"noopener\"\u003econstant-velocity joint\u003c\/a\u003e works.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Is Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 x front CV axle shaft assemblies (left and right)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe product photo shows two matching axles, each fully assembled with both joints and boots fitted. Hub seals, differential seals and other hardware are not listed as included.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Front CV axle shaft assembly, pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front left and front right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference number:\u003c\/strong\u003e 15886012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressed length:\u003c\/strong\u003e 25–27.3 in (634–694 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput spline:\u003c\/strong\u003e 28 teeth, external\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput spline:\u003c\/strong\u003e 33 teeth, external\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoots:\u003c\/strong\u003e Neoprene, pre-packed with high-temperature moly grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel and carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Unbranded aftermarket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CJFU26574040001\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eChecking Fitment\u003c\/h2\u003e\n\u003cp\u003eThe supplier lists this pair for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHummer H3, 2006–2010, front left and front right\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe listing does not break fitment down by engine or trim, and it does not mention the H3T pickup. Rather than rely on the year alone, please check these points:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eLook up the front axle shaft part number\u003c\/strong\u003e for your truck in a GM parts catalogue with your VIN and compare it with 15886012.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCount the splines\u003c\/strong\u003e on an old axle: 28 teeth at the differential end and 33 at the hub end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasure an old axle compressed\u003c\/strong\u003e and compare it with 25–27.3 in (634–694 mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThink about modifications.\u003c\/strong\u003e A lifted or heavily modified H3 may need axles built for the changed geometry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf you would like a second opinion, \u003ca href=\"\/pages\/contact\"\u003esend us your VIN\u003c\/a\u003e and we will help you check before you order.\u003c\/p\u003e\n\n\u003ch2\u003eSigns the Front CV Axles Are Worn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClicking or popping from the front when turning, especially on tight turns\u003c\/li\u003e\n\u003cli\u003eGrease thrown onto the inside of the wheel, the control arm or the skid plate\u003c\/li\u003e\n\u003cli\u003eA boot that is torn, cracked or missing its clamp\u003c\/li\u003e\n\u003cli\u003eVibration under acceleration that fades when you ease off\u003c\/li\u003e\n\u003cli\u003eA clunk as drive is taken up from a standstill\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWheel bearings, ball joints and front differential bushings can cause similar noises on these trucks, so look over the whole front end before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLoosen the axle nut with the wheel on the ground, then raise the truck and support it on stands rated for its weight.\u003c\/li\u003e\n\u003cli\u003eFollowing the service manual, free the steering knuckle enough to slide the outer joint out of the hub.\u003c\/li\u003e\n\u003cli\u003eRelease the inner joint from the front differential carefully so the seal is not damaged.\u003c\/li\u003e\n\u003cli\u003eFit the new axle, check the inner end is fully seated, and tighten all fasteners to the specified torque.\u003c\/li\u003e\n\u003cli\u003eCheck the front differential oil level and road test, listening for noise on full lock in both directions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe H3 is heavy and this is steering and suspension work. Unless you have the tools and experience, have a qualified mechanic fit the axles.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Change Both Axles Together\u003c\/h2\u003e\n\u003cp\u003eThe left and right axles have done the same miles over the same ground. When one boot has let go, the rubber on the other side is the same age. Most of the labour is in getting the knuckle off, and doing both sides back to back saves time. With the Hummer H3 CV axle pair you get both shafts in one order.\u003c\/p\u003e\n\n\u003ch2\u003eLooking After CV Axles on an Off-Road Truck\u003c\/h2\u003e\n\u003cp\u003eCheck the boots after every trail day. Sticks, rocks and packed mud are what usually damage them, and a small nick turns into a split quickly. Wash mud off the underside before it dries, and go easy on the throttle when the steering is at full lock on a climb, because that is when the outer joints take the most load.\u003c\/p\u003e\n\n\u003ch2\u003eTools and Parts to Have Ready\u003c\/h2\u003e\n\u003cp\u003eYou will need a large socket and breaker bar for the axle nut, a torque wrench, a ball joint separator, a pry bar or slide hammer for the inner joint, and heavy-duty stands. New seals and the correct front differential oil are sensible things to have on the bench. Before fitting, lay the new axles next to the old ones and compare length and spline counts at both ends.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Axle Pair Is For\u003c\/h2\u003e\n\u003cp\u003eThis set suits Hummer H3 owners, 4x4 specialists and general workshops who have confirmed the 15886012 reference number, or matched the length and splines, for the truck being repaired.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a genuine GM or Hummer part?\u003c\/strong\u003e No. These are unbranded aftermarket CV axles listed under reference number 15886012. They are not genuine parts of the vehicle maker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre both axles the same?\u003c\/strong\u003e The supplier gives one reference number, one length and one set of spline counts for the pair, and the photo shows two matching axles. Compare them with your old ones before fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they fit the H3T?\u003c\/strong\u003e The supplier lists the Hummer H3 only. Check the part number for an H3T before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eBuy the Hummer H3 CV Axle Pair at Easy Life Markets\u003c\/h2\u003e\n\u003cp\u003eYou can order this front CV axle pair right here. The current price and availability are shown on this page. Please read our \u003ca href=\"\/pages\/return-refund-policy\"\u003ereturn and refund policy\u003c\/a\u003e before buying.\u003c\/p\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/2003-2022-4runner-cv-axle-pair\"\u003e2003-2022 4Runner CV axle pair\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/2007-2020-escalade-front-cv-axle\"\u003e2007-2020 Escalade front CV axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1999-2006-silverado-1500-front-cv-axle\"\u003e1999-2006 Silverado 1500 front CV axle\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse our \u003ca href=\"\/collections\/cv-joints-axles\"\u003eCV joints and axles\u003c\/a\u003e, \u003ca href=\"\/collections\/transmission-drivetrain\"\u003etransmission and drivetrain\u003c\/a\u003e and \u003ca href=\"\/collections\/auto-parts\"\u003eauto parts\u003c\/a\u003e collections.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Photos\u003c\/h2\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/17660160\/e3054703-7744-4261-99f1-146fd5b892ec.jpg\" alt=\"Hummer H3 CV axle pair, two front axle shafts\" style=\"max-width:100%;\"\u003e\n\u003c\/p\u003e","brand":"easylife markets","offers":[{"title":"Black","offer_id":46972224929953,"sku":"CJFU26574040001","price":741.51,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/2086\/9537\/files\/617175df-af44-4178-a378-33a72c72d9e5.jpg?v=1788597306","url":"https:\/\/easylifemarketplace.com\/products\/hummer-h3-cv-axle-pair","provider":"Easy Life Markets","version":"1.0","type":"link"}