{"product_id":"vevor-carrier-pinion-bearing-puller","title":"VEVOR Carrier \u0026 Pinion Bearing Puller for Dana 30, 40, 50, 60, 70, 80 and Ford 10.25 Bearings – Steel Clamshell Puller Tool with 3 Clamshells","description":"\u003ch2\u003eVEVOR Carrier and Pinion Bearing Puller for Dana and Ford 10.25 Axles\u003c\/h2\u003e\n\u003cp\u003eThis VEVOR pinion bearing puller is a clamshell-style tool for pulling pressed-on carrier and pinion bearings during differential work. The supplier lists it as compatible with bearings on Dana 30, 40, 50, 60, 70 and 80 axles and the Ford 10.25 inch axle. It comes with three clamshells, a plug, adjuster rings and a stand that keeps everything together on the bench. Easy Life Markets sells it for axle builders, gear installers and home mechanics who are tired of fighting bearings off with a chisel.\u003c\/p\u003e\n\n\u003cp\u003eAnyone who has set up a ring and pinion knows the problem. Getting the pinion depth and carrier preload right means fitting shims behind the bearings, checking the pattern, and often taking the bearings off again to change the shims. A jaw puller has very little to grab on these bearings and tends to tear the cage. A clamshell puller closes around the bearing and pulls on the inner race, which is the part that is actually pressed onto the shaft. If you want the background on what these bearings support, the \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Differential_(mechanical_device)\" target=\"_blank\" rel=\"noopener\"\u003edifferential\u003c\/a\u003e article is a good place to start.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Is Included\u003c\/h2\u003e\n\u003cp\u003eThe supplier's parts picture lists these pieces:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x main puller body\u003c\/li\u003e\n\u003cli\u003e1 x plug\u003c\/li\u003e\n\u003cli\u003e1 x 4.45 inch black clamshell\u003c\/li\u003e\n\u003cli\u003e1 x 5.2 inch white clamshell\u003c\/li\u003e\n\u003cli\u003e1 x 4.45 inch yellow clamshell\u003c\/li\u003e\n\u003cli\u003eAdjuster rings\u003c\/li\u003e\n\u003cli\u003e1 x stand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn impact wrench is not included.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e VEVOR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Carrier and pinion bearing puller, clamshell type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed compatibility:\u003c\/strong\u003e Dana 30, 40, 50, 60, 70 and 80, and Ford 10.25 inch bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamshells:\u003c\/strong\u003e 3 (4.45 in black, 5.2 in white, 4.45 in yellow)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Machined and welded steel, listed as 45# steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct weight:\u003c\/strong\u003e 32.85 lb (14.9 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct size:\u003c\/strong\u003e 10.1 x 5 x 11 in (25.5 x 12.7 x 27.9 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CJJT234769101AZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow the Puller Works\u003c\/h2\u003e\n\u003cp\u003eThe supplier shows the job in four steps:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePlace the main body over the plug.\u003c\/li\u003e\n\u003cli\u003eAdjust the lower and upper adjusting rings so the tool sits at the right height for the bearing.\u003c\/li\u003e\n\u003cli\u003ePick the clamshell that suits the bearing, close it around the bearing and tighten the retaining ring so it cannot spread.\u003c\/li\u003e\n\u003cli\u003eTurn the hex on top of the main body to draw the bearing off. The supplier shows this being done with an impact gun.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe plug gives the centre screw something to push against, and the clamshell pulls the bearing up evenly all the way round.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Bearings It Suits\u003c\/h2\u003e\n\u003cp\u003eThe supplier lists Dana 30, 40, 50, 60, 70 and 80 bearings and Ford 10.25 inch bearings. It does not list individual bearing part numbers or say which clamshell goes with which axle, so before ordering it is worth checking a couple of things:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasure the outside diameter of the bearing you need to pull and compare it with the 4.45 inch and 5.2 inch clamshell sizes.\u003c\/li\u003e\n\u003cli\u003eCheck there is enough room behind the bearing for the lip of the clamshell to seat on the inner race.\u003c\/li\u003e\n\u003cli\u003eIf your axle is not on the list above, \u003ca href=\"\/pages\/contact\"\u003eask us\u003c\/a\u003e before you buy and tell us the bearing size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Use a Clamshell Puller\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIt pulls on the inner race, so there is less chance of tearing the cage and rollers apart.\u003c\/li\u003e\n\u003cli\u003eIt saves time when you have to take a bearing off more than once to change shims.\u003c\/li\u003e\n\u003cli\u003eThere is no need to pry against a seal surface or cut the bearing off.\u003c\/li\u003e\n\u003cli\u003eThe stand keeps the body, plug and clamshells together between jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe supplier states that the tool removes bearings without damage. In practice that depends on the clamshell seating properly, so take a moment to check it before you put a wrench on it.\u003c\/p\u003e\n\n\u003ch2\u003eTips for Using the Tool\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClean the bearing and shaft first so the clamshell seats fully.\u003c\/li\u003e\n\u003cli\u003eMake sure the retaining ring is tight before pulling. A loose ring lets the clamshell halves open.\u003c\/li\u003e\n\u003cli\u003ePut a little grease or anti-seize on the centre screw threads so they last.\u003c\/li\u003e\n\u003cli\u003eStart by hand or with short bursts from the impact gun and watch that the bearing is coming off straight.\u003c\/li\u003e\n\u003cli\u003eWear eye protection. Bearings and races are hardened and can chip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLooking After the Puller\u003c\/h2\u003e\n\u003cp\u003eWipe the tool down after use and keep the screw threads lightly oiled. Store the clamshells on the stand so the halves stay in matched pairs. Steel tools rust if they are put away wet, so keep the set somewhere dry.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Tool Is For\u003c\/h2\u003e\n\u003cp\u003eThe puller suits differential and axle shops, off-road builders who change gear ratios, and DIY mechanics doing their own ring and pinion setup on the listed Dana and Ford axles. At nearly 15 kg it is a bench tool, not something for a roadside kit.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work on both carrier and pinion bearings?\u003c\/strong\u003e The supplier describes it as a carrier and pinion bearing puller for the listed axles. Check your bearing size against the clamshells before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need an impact wrench?\u003c\/strong\u003e The supplier shows it used with an impact gun. One is not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit a GM or Toyota axle?\u003c\/strong\u003e Those are not listed by the supplier. Compare your bearing diameter with the clamshell sizes, or contact us first.\u003c\/p\u003e\n\n\u003ch2\u003eBuy the VEVOR Pinion Bearing Puller at Easy Life Markets\u003c\/h2\u003e\n\u003cp\u003eYou can order this pinion bearing puller right here. The current price and availability are shown on this page. Please read our \u003ca href=\"\/pages\/return-refund-policy\"\u003ereturn and refund policy\u003c\/a\u003e before buying.\u003c\/p\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/heavy-duty-yoke-puller-class-6-8-trucks\"\u003eheavy duty yoke puller for Class 6-8 trucks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/52853431aa-front-driveshaft-jeep-commander-grand-cherokee\"\u003e52853431AA front driveshaft for Jeep Commander and Grand Cherokee\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hummer-h3-cv-axle-pair\"\u003eHummer H3 CV axle pair\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse our \u003ca href=\"\/collections\/differentials\"\u003edifferentials\u003c\/a\u003e, \u003ca href=\"\/collections\/tools\"\u003etools\u003c\/a\u003e and \u003ca href=\"\/collections\/tools-equipment\"\u003etools and equipment\u003c\/a\u003e collections.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Photos\u003c\/h2\u003e\n\u003cp\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/2501e437-043d-4d2b-b51b-84ec82a1839a.jpg\" alt=\"VEVOR pinion bearing puller with three clamshells\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/9fd6a51f-acee-42d3-a220-ff1cba24aa61.jpg\" alt=\"Bearing puller dimensions and weight\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/4987710a-5854-4eac-a967-87438f084408.jpg\" alt=\"Machined and welded steel clamshell and puller body\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/64638cf5-cea0-44c9-b101-d00d7a498b6c.jpg\" alt=\"Bearing puller parts: body, plug, clamshells, adjuster rings and stand\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/78d36921-04a5-43c0-bea4-30554378bd40.jpg\" alt=\"Four steps for removing a bearing with the puller\" style=\"max-width:100%;\"\u003e\n\u003cimg src=\"https:\/\/cf.cjdropshipping.com\/cd460ed3-c5cd-4af5-bcef-db913125b095.jpg\" alt=\"Clamshell bearing puller set on its stand\" style=\"max-width:100%;\"\u003e\n\u003c\/p\u003e","brand":"easylife markets","offers":[{"title":"Black","offer_id":46972322185377,"sku":"CJJT234769101AZ","price":510.4,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/2086\/9537\/files\/d9b562a3-5d3c-4653-ace5-02394c4d8550.jpg?v=1788598384","url":"https:\/\/easylifemarketplace.com\/products\/vevor-carrier-pinion-bearing-puller","provider":"Easy Life Markets","version":"1.0","type":"link"}