1999-2006 Silverado 1500 Front CV Axle | Left or Right

1999-2006 Silverado 1500 Front CV Axle – Left or Right (Driver or Passenger) CV Joint Axle for Chevrolet Silverado 1500, Alloy & Carbon Steel

Dhs. 412.02

1999-2006 Silverado 1500 Front CV Axle – Driver or Passenger Side

This 1999-2006 Silverado 1500 front CV axle is a single front CV axle shaft assembly listed for the 1999–2006 Chevrolet Silverado 1500, for use on either the driver or the passenger side. It is listed under reference numbers 26069244 and 26020730, with an overall compressed length of 21 to 23 inches (530 to 585 mm), a 6-hole flange input and a 33-tooth output spline. Easy Life Markets sells it for truck owners and repair shops who need to replace a worn or noisy front axle on a four-wheel-drive Silverado 1500.

On a four-wheel-drive Silverado 1500 with independent front suspension, each front wheel is driven by its own CV axle running from the front differential. Constant-velocity joints at both ends let the axle deliver power smoothly while the wheel moves up and down and steers left and right. Pickups often carry heavy loads, tow trailers and see rough roads, which is hard on the joints and boots. Once a boot splits, dirt gets in and the joint wears quickly. Read more about the constant-velocity joint for background.

What Is Included

1 x front CV axle shaft assembly (left or right side, as listed by the supplier)

The axle comes as a complete assembly with joints and boots fitted. Hub nuts and flange bolts are not listed as included. To replace both sides, order two axles.

Specifications

Product type: Front CV axle shaft assembly
Position: Front left (driver) or front right (passenger)
Reference numbers: 26069244, 26020730
Overall compressed length: 21–23 in (530–585 mm)
Input end: 6-hole flange
Output shaft: 33-tooth external spline
Boots: Neoprene, pre-packed with high-temperature moly grease
Material: Alloy steel and carbon steel
Colour: Black
Brand: Unbranded aftermarket
Quantity: 1
SKU: CJFU26591790001

Checking Fitment

The supplier lists this axle for:

Chevrolet Silverado 1500, 1999–2006, front left or front right

Two-wheel-drive Silverado 1500 trucks do not have front CV axles, and heavier-duty versions use different front axles. Please check these points before ordering:

Confirm four-wheel drive. This axle is only for trucks with a driven front axle.
Check the part number in a Chevrolet or GM parts catalogue using your VIN and compare it with 26069244 or 26020730.
Compare the ends. Look for a 6-hole flange at the differential end and 33 splines at the hub end.
Measure the old axle compressed and compare it with 21–23 in (530–585 mm).

Not sure? Contact us with your VIN and we will help you check.

Signs Your Front CV Axle Needs Replacing

Clicking or popping when turning in four-wheel drive
Grease splattered around the inside of the wheel or on the frame
A split or loose CV boot
Vibration or shudder when accelerating
Clunking from the front when engaging four-wheel drive or pulling away

Hub bearings, ball joints and front differential issues can produce similar noises, so inspect the front end before deciding.

Installation Tips

Break the hub nut loose with the truck on the ground, then lift and support it securely on stands.
Remove the wheel and, following your service manual, free the outer end of the axle from the hub.
Unbolt the 6-hole flange from the front differential and remove the old axle.
Clean the flange faces, fit the new axle and tighten all fasteners to the specified torque.
Check the front differential fluid and road test in two-wheel and four-wheel drive.

Professional installation is recommended if you are not comfortable working on steering, suspension and drivetrain parts.

Tips for Trucks That Tow or Go Off-Road

If your Silverado tows, carries heavy loads or leaves the pavement, check the front axle boots more often. Mud, branches and rocks can tear a boot, and a joint that runs without grease wears fast. Lifted trucks and leveling kits increase the angle the joints run at, which can shorten their life. Keeping the ride height within normal limits and checking the boots regularly helps your 1999-2006 Silverado 1500 front CV axle last.

One Side or Both?

This listing is for one axle, which is ideal if only one side has failed. When the other side has similar mileage and its boot is cracking, it can be worth replacing both at once so the truck drives evenly and you avoid a second repair soon after.

Tools and Parts to Have Ready

Most jobs need a large socket and breaker bar for the hub nut, sockets for the flange bolts, a torque wrench, jack stands rated for the truck's weight, and a pry bar or puller to free the axle from the hub if it is tight. New hub nuts are a good idea if your service manual calls for them. Keep clean rags and parts cleaner to hand for the flange faces and hub splines, and check that you have the correct fluid for the front differential in case it needs a top-up after the job.

Who This CV Axle Is For

This axle suits owners of a four-wheel-drive 1999–2006 Chevrolet Silverado 1500, fleet maintenance teams and independent workshops who have confirmed the reference number, flange style and spline count.

Common Questions

Is this a genuine Chevrolet or GM part? No. It is an unbranded aftermarket CV axle listed under reference numbers 26069244 and 26020730. It is not a genuine part of the vehicle maker.

How many axles do I get? One. It is listed for either the left or the right front side.

Does it fit a two-wheel-drive Silverado? No. Two-wheel-drive trucks do not use front CV axles.

Buy the 1999-2006 Silverado 1500 Front CV Axle at Easy Life Markets

You can order this front CV axle directly from this page. The current price and availability are shown on this page. Please read our return and refund policy before buying.