DIY Tools, Workshop Equipment and Tool Storage at Easy Life Markets
Easy Life Markets sells DIY tools and workshop equipment for home repairs, car maintenance and garage organisation. This category brings together hand tools, specialist automotive tools such as timing kits, pulley holders and bearing pullers, and the shelving and cabinets that keep a workshop in order. It is built for people who would rather fix it themselves, and for workshops that need the right tool for a specific job.
What should you buy? If you are starting out, buy a small set of good basic hand tools and somewhere to keep them. If you already have the basics, buy the specialist tool for the job in front of you: a timing tool kit before a belt change, a holding tool before you tackle a crankshaft pulley bolt, a puller before you fight a pressed-on bearing. This guide explains the main types of tools, what to check before you buy, how to store and care for them, and how to work safely. The current price and availability are shown on each product page.
What is in our tools category
- Hand tools: manual tools you hold and turn yourself, including belt adjuster sets and holding tools.
- Automotive tools and equipment: engine timing kits, pulley holders, bearing and yoke pullers for drivetrain work.
- Wrenches and diagnostic equipment for vehicle work.
- Storage and shelving: steel garage racks, wire shelving and a lockable tool cabinet.
The Main Types of DIY Tools and What Each Is For
A tool kit grows in layers. First come the general hand tools that every home needs. Then come the tools for the jobs you do often, such as car servicing or furniture assembly. Last come the specialist tools you buy for one task and keep for the next time. Our range covers each layer and will keep growing as we add new products.
General hand tools
Hand tools are the base of any kit: screwdrivers, spanners and wrenches, pliers, a hammer, a utility knife, hex keys and a tape measure. With these you can assemble flat-pack furniture, hang shelves, tighten loose hinges and do most small household repairs. The hand tool article gives a good overview of the main families and how they developed. When you choose hand tools, look at the steel, the grip and the fit. A spanner that fits the fastener properly will not round off the corners of the nut.
Power tools
Power tools save time on repetitive or heavy work: a drill driver for holes and screws, a jigsaw or circular saw for cutting, a sander for finishing. For most homes, a cordless drill driver is the first power tool worth owning. When we list power tools, check the voltage, whether a battery and charger are included, and the chuck size. Cordless tools from the same battery platform can share batteries, which keeps costs down as your kit grows.
Specialist automotive DIY tools
Car repair is where specialist DIY tools pay for themselves fastest. One job done at home can cost less than the tool, and the tool stays in your box. Timing belt work is a good example. On many engines the camshafts and crankshaft must be locked in position while the belt is changed, and that needs tools made for that engine. Our EA211 timing tool kit is a camshaft and crankshaft locking set for Volkswagen Group EA211 petrol engines, with six tools in a fitted case. The 15-piece timing belt adjuster tool kit is a chrome vanadium set with a flat curved handle and interchangeable E-type and 12-point adapters for tensioners in tight engine bays.
Some bolts need a second pair of hands, or a tool that acts like one. The crankshaft pulley bolt is often tightened to a very high torque, and the crankshaft pulley holding tool set stops the pulley turning while you loosen or tighten it. For drivetrain work, the VEVOR carrier and pinion bearing puller pulls pressed-on bearings on Dana 30 to 80 and Ford 10.25 inch axles, and the heavy duty yoke puller is for U-joint bearing caps on Class 6 to 8 trucks. You can find related parts in timing belts and chains and our full auto parts range.
Measuring and layout tools
Accurate work starts with accurate marks. A tape measure, a spirit level, a combination square and a pencil cover most DIY jobs. For hanging cabinets and shelves, a level is the tool that makes the difference between a job that looks professional and one that looks slightly wrong forever. Measure twice before you drill once.
Tool storage and workshop shelving
Tools that are stored well last longer and get used more, because you can find them. Storage is part of this category for that reason. The metal garage storage cabinet stands 70.87 inches tall on castors, with three adjustable shelves, a key lock and pegboard panels inside the doors for hanging tools. The 5 tier garage shelving unit is a 72 inch boltless steel rack, 16 inches deep, which the supplier rates at 400 lb per shelf. For bulky items, the 4 tier garage shelving unit is 40 inches wide and 20 inches deep with MDF shelf boards.
For lighter loads, the wire shelving unit is 62.9 inches wide with three bays and eleven adjustable shelves, and the compact 3 tier wire shelving rack measures 30 x 30 x 60 cm, small enough for a utility corner or a workbench. More options are in storage and organisation.
Safety equipment
Every tool kit should include eye protection, work gloves and, for noisy or dusty work, hearing protection and a dust mask. They cost little and prevent the most common workshop injuries. Wear safety glasses whenever you cut, grind, drill, hammer or work under a car.
How to Choose DIY Tools
Buy for the job you have now
Large all-in-one kits look good value, but many pieces never get used. It is usually better to buy the tools for the job in front of you, then add more as new jobs come up. That way every tool you own is one you need.
Check the fit for your vehicle or fixing
Automotive tools are often made for specific engines, axles or bolt sizes. Read the compatibility list on the product page and compare it with your vehicle's engine code or axle type. If you are not sure, check your service manual or contact us with the details before ordering.
Look at the steel and the finish
Chrome vanadium steel is common for wrenches, sockets and adapters because it is hard and resists wear. Hardened carbon steel is used for pullers and holding tools that take heavy force. A plated or black oxide finish helps resist rust. The product page states what the supplier lists for material.
Check the case
A fitted case keeps every piece in its place and shows at a glance if something is missing. That matters most for kits with many small parts, such as timing kits and adapter sets.
For storage, check load and size
Compare the width, depth and height with the space in your garage or shed. Check the load rating per shelf and in total, and remember that ratings assume an evenly spread load on a level floor.
DIY Tools Compared by Type
| Tool type | Typical jobs | What to check | Skill level |
|---|---|---|---|
| Basic hand tools | Assembly, small repairs, hanging shelves | Steel quality, grip, correct sizes | Beginner |
| Power tools | Drilling, cutting, sanding | Voltage, battery and charger included, chuck size | Beginner to intermediate |
| Engine timing kits | Timing belt replacement | Engine code and listed compatibility | Experienced |
| Belt and tensioner tools | Belt tension and pulley work | Adapter types and sizes, handle reach | Intermediate |
| Holding tools | Pulley and flywheel bolts | Pin spacing and fit on your pulley | Intermediate to experienced |
| Bearing and yoke pullers | Differential and driveline work | Axle or yoke size listed | Experienced |
| Garage shelving and cabinets | Storing tools, parts and supplies | Dimensions, load rating, lock and castors | Assembly only |
Building a Tool Kit in Stages
Stage 1: the household kit
This is the kit every home should have in a drawer or a small case. It covers flat-pack furniture, loose handles, picture hanging and most small fixes.
- Screwdrivers in flat and cross-head types, in two or three sizes
- A small set of combination spanners or an adjustable wrench
- Pliers and side cutters
- A claw hammer and a utility knife
- Hex keys, a tape measure and a small spirit level
- Safety glasses and a pair of work gloves
Stage 2: the car maintenance kit
Once you start doing your own servicing, add a socket set with a ratchet, a torque wrench, a set of axle stands, a trolley jack and a drain tray. With these you can change oil, rotate wheels and replace pads. As you take on bigger jobs, such as belts or pulleys, add the specialist DIY tools for your engine: a timing kit, belt adjuster tools and a pulley holding tool.
Stage 3: the home workshop
A workshop needs space to work and space to store. Put a sturdy bench against one wall and steel shelving beside it for parts, oils and tool cases. Keep hand tools on pegboard or in a cabinet within reach of the bench, so you can see what you have. Good lighting matters as much as any tool, because most mistakes happen when you cannot see clearly.
Setting Up Garage Storage
Start by sorting what you have into groups: hand tools, power tools, car parts, fluids and chemicals, garden items and household spares. Give each group a home. Heavy, bulky items such as tyres, crates and paint tins go on low, deep shelves. Lighter items go higher. Chemicals and sharp tools go in a lockable cabinet. Keep a clear path to the door and leave room to open car doors if you park inside. Steel racks with adjustable shelves let you change the layout as your collection changes, which is why boltless designs are popular for garages and sheds.
Care and Maintenance of Your Tools
- Wipe tools clean after use. Oil, grease and brake dust attract moisture and grit.
- Store tools dry. A closed cabinet keeps dust and damp off, and a sachet of desiccant in a drawer helps in humid garages.
- Give steel tools a light coat of oil if they will sit unused for a long time.
- Put each piece back in its case after the job, so you know the kit is complete next time.
- Check moving parts on pullers and adjusters, and grease threads so they turn smoothly under load.
- Replace tools that are cracked, bent or worn. A worn tool slips, and slipping is how knuckles get hurt.
- For shelving, check that uprights are level and bolts or clips are secure, and anchor tall units to the wall.
Working Safely
Safety is part of using DIY tools well. Wear eye protection whenever there is a chance of chips, sparks or splashes. Never work under a vehicle held only by a jack; use axle stands on firm, level ground. Disconnect the battery before electrical work on a car. Follow the torque values and procedures in your vehicle's service information, especially for timing work, because a timing error can damage an engine. Keep sharp and heavy tools out of reach of children, and lock cabinets that hold chemicals or blades. If a job is beyond your experience, there is no shame in handing it to a professional.
Buying Tips From Our Workshop
- Read the full product description. It explains what the supplier lists for compatibility, materials and contents.
- Match automotive tools to your engine code or axle type, not just to the car model name.
- Buy storage at the same time as tools. It is easier to keep a garage tidy from the start.
- Plan for growth. A cabinet with pegboard doors or an adjustable rack adapts as the kit expands.
- Check our return and refund policy before ordering heavy items such as cabinets and steel racks.
- Shipping information is on our shipping policy page.
Who Our DIY Tools Suit
This range is for home mechanics who service their own cars, homeowners who handle their own repairs, hobbyists setting up a garage or shed, and small workshops that need a specific tool for a job. The automotive tools suit people with some mechanical experience, and the product pages say what each tool is designed for. The shelving and cabinets suit anyone who has ever spent twenty minutes looking for a socket. If you are organising the rest of the home too, see home and garden and garden and outdoor.
Frequently Asked Questions
What DIY tools should a beginner buy first?
A screwdriver set, a set of spanners or a socket set, pliers, a hammer, a tape measure, a level, a utility knife and safety glasses. Add a cordless drill driver when you start hanging shelves or assembling furniture often.
Do I need special tools to change a timing belt?
On many engines, yes. Locking tools hold the camshafts and crankshaft in the correct position while the belt is off. Check that the kit lists your engine code, and follow the service procedure for your vehicle.
What is a crankshaft pulley holding tool for?
It stops the crankshaft pulley turning while you loosen or tighten the central bolt, which is often very tight. It saves you from jamming the engine with a bar, which can damage parts.
What does chrome vanadium mean on a tool?
It is a steel alloy used for wrenches, sockets and adapters. It is hard, tough and resists wear, which suits tools that take repeated force.
How much weight can garage shelving hold?
Each product page lists the supplier's rating per shelf and in total. Spread the load evenly, put heavy items on lower shelves and anchor tall units to the wall.
Will you add more tools to this category?
Yes. We add new DIY tools and equipment regularly, so check back or browse tools and equipment for the latest additions.
Where can I get more help before I order?
Read our FAQ or contact us with your vehicle or project details, and we will help you check the listing.
Shop DIY Tools at Easy Life Markets
Easy Life Markets sells every tool and storage unit in this category. Each product page lists what the supplier states about sizes, materials, compatibility and what is in the box, together with the current price and availability. Start with the tools for your next job, add storage to keep them in order, and come back as your projects grow. If you need help choosing, send us a message and our team will point you to the right tool.