52853431AA Front Driveshaft | 2007-2010 Commander, Grand Cherokee

52853431AA front driveshaft, full length

52853431AA Front Driveshaft Prop Shaft for 2007-2010 Jeep Commander & Grand Cherokee 4WD – 65-3007

Dhs. 757.06

52853431AA Front Driveshaft for 2007–2010 Jeep Commander and Grand Cherokee 4WD

This 52853431AA front driveshaft is a complete front prop shaft assembly for 2007–2010 Jeep Commander and Jeep Grand Cherokee four-wheel-drive models. It is listed under reference numbers 52853431AA and 65-3007 (also 653007 and 938-137), measures 33.62 inches long, and uses a 2.0-inch steel tube. Easy Life Markets sells it as a new, ready-to-install replacement for owners and workshops dealing with a worn or damaged front driveshaft.

On a four-wheel-drive Jeep, the front driveshaft carries power from the transfer case to the front differential. It has to handle torque while the front suspension moves up and down, so it uses flexible joints at each end. Over time, these joints wear, boots split and let dirt in, and the shaft can start to vibrate or clunk. When the joints are worn or the shaft is damaged, replacing the complete assembly is usually quicker and more dependable than rebuilding the old one. You can read more about how a drive shaft transmits power.

What Is Included

1 x front driveshaft (prop shaft) assembly

The product photos show the complete shaft with its flanged end fittings and joint boot. Mounting bolts are not listed as included, so plan to reuse or replace your hardware as your service information recommends.

Specifications

Product type: Front driveshaft / prop shaft assembly
Position: Front
Reference numbers: 52853431AA, 65-3007, 653007, 938-137
Shaft length: 33.62 in
Tube outer diameter: 2.0 in
Tube material: Steel
Brand: Unbranded aftermarket
Condition: New
Quantity: 1
SKU: CJQT232638901AZ

Compatibility

The supplier lists this driveshaft for:

Jeep Commander, 2007–2010, four-wheel drive
Jeep Grand Cherokee, 2007–2010, four-wheel drive

The listing names the 3.7L V6, 4.7L V8 and 5.7L V8 engines and trims including Base, Laredo, Limited, Overland, North Edition and Sport. These vehicles were built with different transfer cases and drivetrain options, and not every version uses the same front driveshaft. To make sure you order the right part:

Check the part number on your old shaft or in a Jeep parts catalogue using your VIN, and compare it with 52853431AA.
Measure your old shaft and compare it with the 33.62-inch length.
Compare the end fittings in the photos with those on your vehicle.

This driveshaft is not listed for two-wheel-drive models, which do not use a front driveshaft. If you are unsure, send us your VIN and we will help you check before you order.

Signs of a Worn Front Driveshaft

Vibration that increases with speed, especially in four-wheel drive
Clunking when shifting into gear or when accelerating
Clicking or grinding noises from the front of the vehicle when turning
Torn joint boots or grease thrown around the underside
Visible play in the joints or a dented, bent tube

Worn front differential or transfer case parts can cause similar noises, so it is worth inspecting the whole front drivetrain.

Installation Notes

Park on level ground, secure the vehicle on stands and chock the wheels.
Mark the position of the old shaft on each flange before removal.
Unbolt the shaft at the front differential and transfer case, and support it as you remove it.
Clean the mating flanges and fit the new shaft, tightening all bolts to the torque in your service manual.
Road test in two-wheel and four-wheel drive and check for vibration or noise.

Professional installation is recommended if you are not experienced with drivetrain work.

Why Replace the Complete Assembly

Rebuilding a front driveshaft means sourcing joints, pressing parts apart and balancing the shaft afterwards. A complete assembly arrives ready to fit, which saves time and avoids the vibration problems that can follow a poor rebuild. It also restores all the joints at once instead of just the worst one.

Front Driveshaft Care Tips

After fitting, check the joint boots regularly, especially after off-road driving. A torn boot lets water and grit reach the joint and shortens its life, so replacing a damaged boot early is much cheaper than replacing the shaft again. If your driveshaft has grease fittings, service them at the interval in your owner's manual. Keeping the transfer case and front differential topped up with the correct fluid also helps the whole front drivetrain run smoothly and quietly.

Who This Driveshaft Is For

This front driveshaft suits owners of 2007–2010 Jeep Commander and Grand Cherokee 4WD models, independent workshops, and off-road enthusiasts who have confirmed the 52853431AA part number for their vehicle.

Common Questions

Is this a genuine Jeep part? No. It is an unbranded aftermarket driveshaft sold under the Jeep reference number 52853431AA.

Does it fit the rear? No. This is the front driveshaft only.

Buy the 52853431AA Front Driveshaft at Easy Life Markets

You can order this front driveshaft right here. The current price and availability are shown on this page. Please read our return and refund policy before buying.