F7TZ-12K073-B Camshaft Position Sensor for Ford

F7TZ-12K073-B Camshaft Position Sensor for Ford – CMP Sensor F7TZ12K073B

Dhs. 155.37

F7TZ-12K073-B Camshaft Position Sensor for Ford Vehicles

This F7TZ-12K073-B camshaft position sensor is a replacement CMP sensor listed under Ford part number F7TZ-12K073-B (also written F7TZ12K073B). It is an aftermarket replacement sensor, not a Ford-branded part, sold as a single unit. Easy Life Markets sells it for drivers and mechanics replacing a failed camshaft sensor on Ford vehicles that use this part number.

Ford parts catalogues show F7TZ-12K073-B on a range of Ford vehicles from roughly the 1997–2004 period, including F-Series and E-Series trucks and vans. Because Ford used it across several models and engines, the part number is the best way to confirm you have the right sensor.

What a Camshaft Position Sensor Does

The camshaft position sensor tells the engine computer where the camshaft is in its rotation. The engine control unit uses that signal together with the crankshaft position to time fuel injection and, on many engines, to identify which cylinder is firing. When the signal drops out or becomes erratic, the engine can be hard to start or run poorly.

Common Signs of a Failing CMP Sensor

Check engine light with a camshaft position sensor fault code
Hard starting or extended cranking, especially when the engine is hot
Stalling or cutting out while driving
Rough idle, misfires or hesitation
Reduced fuel economy

Some of these symptoms can also come from wiring, connector or other sensor problems, so it is worth reading the fault codes and checking the wiring before replacing the sensor.

What Is Included

1 x camshaft position sensor

The sensor is shown in the product photos with its mounting bracket and electrical connector. Please compare it with your old sensor before installation.

Specifications

Product type: Camshaft position (CMP) sensor
Reference part number: F7TZ-12K073-B / F7TZ12K073B
Listed application: Ford vehicles using part number F7TZ-12K073-B
Quantity: 1 sensor
SKU: CJYD176938302BY

How to Confirm Fitment

Check the part number printed on your old sensor or shown in a Ford parts catalogue for your vehicle identification number (VIN).
Compare the shape of the sensor body, mounting bracket and connector with our photos.
Confirm the position. Some engines have more than one camshaft sensor, and they are not always the same part.

If you are not sure, send us your vehicle details and we will help you check before you order.

Installation Tips

Turn the ignition off and disconnect the battery before starting.
Unplug the connector carefully. Old plastic locking tabs can be brittle.
Remove the mounting bolt and ease the old sensor out, noting its orientation.
Clean the mounting area, lightly lubricate the new O-ring with clean engine oil if fitted, and install the new sensor.
Tighten the bolt to the specified torque, reconnect the plug and clear the fault codes.

On many engines this is a straightforward job, but access varies by model. If the sensor is hard to reach, a mechanic can fit it quickly.

Why Replace the Sensor

A failing camshaft sensor rarely gets better on its own, and intermittent faults can leave you stranded when the engine refuses to restart. Replacing it restores a clean signal to the engine computer and can clear starting and running problems caused by the old sensor.

Diagnosing Before You Replace

A camshaft position sensor fault code does not always mean the sensor itself has failed. Before fitting a new one, check the connector for corrosion, bent pins or oil, and inspect the wiring for chafing or heat damage near the exhaust. A weak battery or charging problem can also cause low sensor voltage and misleading codes. If the wiring looks good and the code keeps coming back, replacing the sensor is the logical next step.

It also helps to note when the problem happens. Many sensors fail intermittently when hot, so a car that restarts fine once it has cooled down is a classic sign of a sensor on its way out.

Related Sensors to Consider

The camshaft sensor works together with the crankshaft position sensor. If both are original and the vehicle has high mileage, some owners choose to replace both at the same time to avoid a second breakdown. Check the part number for the crankshaft sensor on your vehicle before ordering it separately.

Who This Sensor Is For

This sensor suits owners of Ford vehicles that use part number F7TZ-12K073-B, workshops that keep common sensors in stock, and anyone replacing a failed original sensor.

Common Questions

Is this a Ford-branded part? No. It is an aftermarket replacement sensor sold under the Ford reference number F7TZ-12K073-B so you can match it to your vehicle.

Do I need to reprogram anything after fitting? Usually not. Clear the stored fault codes after installation and take the vehicle for a short drive to confirm the fault does not return.

How do I know which sensor my vehicle has? The part number on your old sensor, or a parts lookup using your VIN, is the most reliable way to check.

Buy the F7TZ-12K073-B Camshaft Position Sensor at Easy Life Markets

You can order this camshaft position sensor right here. The current price and availability are shown on this page. Please read our return and refund policy before buying.