1J0199262C Engine Mount & Transmission Mount for VW

1J0199262C engine and transmission mount set

1J0199262C Engine Mount and Transmission Mount for Volkswagen Passat

Dhs. 547.55

1J0199262C Engine and Transmission Mount for Volkswagen

This 1J0199262C engine mount listing covers engine and transmission mounts for Volkswagen, sold under reference number 1J0199262C. The supplier lists it for the 2012–2014 Volkswagen Passat 2.5L and the 2018–2019 Passat 2.0L. The product photos show a three-piece set: an engine mount, a transmission mount and a lower torque support (dog bone). Easy Life Markets sells it for VW owners and workshops dealing with vibration and clunks from worn mounts.

On transverse-engine Volkswagens, the engine and gearbox are held by a mount on each side and a lower torque support that stops the drivetrain from rocking. The mounts are rubber or fluid-filled units bonded to metal brackets, and they wear with age and heat. When they fail, vibration and knocks come through the steering wheel and floor. You can read more about how engine mounts work.

What Is Included – Please Confirm Before Ordering

The product photos show three parts:

1 x engine mount (with bracket)
1 x transmission mount
1 x lower torque support

However, the supplier's packing list reads "1 x engine and transmission mount", and the variant on this page is labelled "Transmission Mount". Because the photos and the text do not fully agree, please contact us to confirm exactly what is supplied before you order.

Specifications

Product type: Engine mount / motor mount rubber shock absorber / transmission mount
Reference number: 1J0199262C
Listed vehicles: Volkswagen Passat 2.5L (2012–2014), Volkswagen Passat 2.0L (2018–2019)
Variant: Transmission Mount
SKU: CJYD285406701AZ

Checking Fitment

Volkswagen part numbers that start with "1J0" are also catalogued for several earlier VW Group models, and mount part numbers change with engine, gearbox and year. Because of this, the reference number alone may not be enough to confirm fit. Before ordering:

Check the numbers on your existing mounts, or look up your car in a Volkswagen parts catalogue using your VIN.
Confirm your engine and gearbox (for example, 2.5L five-cylinder or 2.0L four-cylinder, manual or automatic).
Compare the photos with your mounts: bracket shape, bolt holes and position of the rubber element.

If you are not sure, send us your VIN and photos of your old mounts and we will help you check.

Signs of Worn Engine and Transmission Mounts

Vibration at idle that you feel in the steering wheel or seat
A clunk when pulling away, shifting gears or lifting off the throttle
Excessive engine movement when revving
Cracked, split or collapsed rubber
Knocking over bumps from the front of the car

Installation Notes

Support the engine and gearbox securely before removing any upper mount.
Replace one mount at a time to keep the drivetrain aligned.
Check that each mount sits correctly before tightening.
Tighten all bolts to Volkswagen's specified torque. Many of these bolts are stretch bolts and should be replaced.
Test drive afterwards and check for vibration and knocks.

Professional installation is recommended.

Why Replace the Mounts Together

The engine mount, transmission mount and torque support work together. A worn torque support lets the engine rock and overloads the upper mounts, and worn upper mounts shift more load onto the torque support. Replacing all worn mounts in one visit gives the best result and avoids repeat labor.

How to Check Your Mounts at Home

With the engine off, look at each mount for cracked, split or oil-soaked rubber, and check whether any rubber element has separated from its metal bracket. Then, with a helper holding the brakes firmly and the engine running, shift between Drive and Reverse and apply a little throttle while you watch the engine. A small movement is normal; a sharp jump or a clunk points to a worn mount.

The lower torque support is a common source of clunks on Volkswagen models, so pay close attention to its bushes. Note which mounts look worn, as this helps when confirming which parts you need.

Who This Part Is For

This listing suits Volkswagen owners with vibration or clunks from worn mounts and independent workshops that work on VW Group cars, once the part number and contents have been confirmed.

Common Questions

Is this one mount or a set? The photos show three parts, but the packing list and variant name suggest a single mount. Please contact us to confirm before ordering.

Is this a genuine Volkswagen part? No. It is an aftermarket replacement sold under the reference number 1J0199262C.

Buy the 1J0199262C Engine Mount at Easy Life Markets

You can order this mount right here. The current price and availability are shown on this page. Please read our return and refund policy before buying.