2007-2011 Camry Control Arm Kit | 14 Pcs Front Suspension Set

2007-2011 Camry control arm kit, 14-piece front suspension set

2007-2011 Camry Control Arm Kit – 14 Pcs Suspension Front Lower Control Arms, Ball Joints, Tie Rods & Sway Bar Links for Toyota Camry

Dhs. 722.59

2007-2011 Camry Control Arm Kit – 14-Piece Front Suspension and Steering Set

This 2007-2011 Camry control arm kit is a 14-piece set that renews most of the wearing joints at the front of the car in one job: both front lower control arms, both lower ball joints, the inner and outer tie rod ends, front and rear sway bar end links and a pair of steering rack boots. The supplier lists it for the Toyota Camry from 2007 to 2011, excluding Hybrid models. Easy Life Markets sells it as one set, so you are not chasing ten separate part numbers and hoping they all match.

On a Camry of this age the front end tends to wear as a group. The lower control arm locates the wheel and carries the bushings, the ball joint lets the steering knuckle pivot, and the tie rods pass steering movement from the rack to the wheel. Once one joint has play in it, the others have covered the same distance and are rarely far behind. Most of this work ends with a wheel alignment anyway, which is why many owners change everything while the car is apart and pay for the alignment once.

What Comes in the Kit

1 x front lower control arm, driver side – K620334
1 x front lower control arm, passenger side – K620333
1 x front lower ball joint, driver side – K500044
1 x front lower ball joint, passenger side – K500043
1 x front outer tie rod end, driver side – ES80603
1 x front outer tie rod end, passenger side – ES80602
2 x front inner tie rod ends – EV800306
2 x front stabilizer (sway bar) end links – K750123
2 x rear stabilizer (sway bar) end links – K750011
2 x rack and pinion tie rod boots (bellows) with locking C-clamps

That is 14 pieces in total. Note the two rear sway bar links: this is mostly a front-end kit, but the supplier includes the rear links as well. No fitting instructions are supplied.

Specifications

Product type: Suspension and steering kit, 14 pieces
Position: Front lower control arms and ball joints, left and right; front inner and outer tie rod ends; front and rear sway bar links
Control arm construction: High-strength steel tubing with solid plate mounting brackets, according to the supplier
Finish: Anti-corrosion coating on the control arms
Welding: Robotic welding, with mounting holes, bushing seats and installation dimensions checked with inspection tools afterwards, according to the supplier
Brand: Unbranded aftermarket parts
SKU: CJQT284438001AZ

Reference Numbers

Besides the numbers shown against each piece above, the supplier gives this interchange list for the kit:

101-6408, 101-6826, 33050, 4333009810, 4546009050, 4547009040, 4550309420, 4550339275, 48068-06070, 48069-06070, 512-58629R, 512-58630L, 517603K001, 517603K002, 520-401, 520-402, ES80602, ES80603, EV800306, K500043, K500044, K620333, K620334, K750011, K750123.

These are cross-reference numbers used to identify what each piece replaces. They do not mean the parts were made by the companies that use those numbers.

Checking Fitment

The supplier lists this kit for the Toyota Camry, model years 2007 to 2011, and excludes Hybrid models. We have no fitment information beyond that, so please confirm it against your own car before ordering:

Confirm the model year and version. The build date is on the plate in the driver's door opening. If your Camry is a Hybrid, this kit is not listed for it.
Look up your parts by VIN. A Toyota parts catalogue will show the lower arm numbers for your car. Compare them with the list above, which includes 48068-06070 and 48069-06070.
Compare old and new before you fit anything. Lay each new piece next to the one it replaces and check the length, the thread and the taper of the stud.
Ask us. If you are unsure, send us your VIN and the numbers from your old parts and we will help you compare them.

Signs the Front End Needs Attention

A clunk or knock from the front when you drive over bumps or brake
Steering that wanders, feels loose or needs constant correction on a straight road
Front tyres wearing on the inner or outer edge
A steering wheel that sits off-centre or shakes at speed
Split rack boots, or grease leaking from a ball joint or tie rod boot
A rattle on rough roads, which often points to worn sway bar links

Fitting Notes

Support the car on stands rated for its weight and soak the old fasteners with penetrating oil well before you start.
Count the turns as you unscrew each outer tie rod end and fit the new one to the same position. That keeps the toe close enough to drive to the alignment shop.
Fit the new rack boots while the inner tie rods are off, and make sure the clamps seat fully.
Tighten the control arm bushing bolts with the car's weight on the suspension, and torque every fastener to the service manual figure.
Book a wheel alignment straight after the work. The supplier strongly recommends one.

Steering and suspension parts are safety-critical, and the supplier recommends professional installation. If you do not have the tools or experience, have a qualified mechanic fit the kit.

Why Replace These Parts Together

A new control arm bolted next to a worn tie rod end still leaves play in the steering, and the alignment will not hold. Doing the arms, ball joints, tie rods and links in one session gives the alignment technician a tight front end to work with, and it means the car is only taken apart once.

Who This Kit Is For

It suits Camry owners doing a full front-end refresh, independent garages quoting one job instead of several, and anyone bringing a high-mileage car back to a good standard, once the model year and non-hybrid version have been confirmed.

Common Questions

Does this fit the Camry Hybrid? No. The supplier's listing excludes Hybrid models.

Are these genuine Toyota parts? No. The 2007-2011 Camry control arm kit is an unbranded aftermarket set. The numbers listed are for cross-reference only.

Do I need an alignment afterwards? Yes. New control arms and tie rod ends change the toe setting, and the supplier recommends an alignment after installation.

Buy the 2007-2011 Camry Control Arm Kit at Easy Life Markets

You can order the full 14-piece set on this page. The current price and availability are shown on this page. Please read our return and refund policy before buying.