Windshield Car Phone Holder – Multifunctional Gravity Suction Cup Phone Stand for iOS and Android Cellphones, with Air Vent Clip
Windshield Car Phone Holder – Multifunctional Gravity Suction Cup Phone Stand for iOS and Android Cellphones, with Air Vent Clip
Windshield Car Phone Holder with Suction Cup and Air Vent Clip
This windshield car phone holder is a suction-cup mount with a telescopic arm and a clamp cradle, and it comes with a second fitting for an air vent. The supplier calls the suction base a "chuck" and lists the set as chuck plus air outlet accessory. It is a universal plastic holder, described as suitable for iOS and Android phones. Easy Life Markets sells it as one set, so you can mount the phone on the glass, on a smooth part of the dashboard or on a vent, whichever suits your car.
A suction cup mount is still the most adaptable type. It needs no adhesive, leaves no mark and moves from car to car in seconds. The usual complaints are a cup that lets go on a hot day and a cradle that needs two hands. This one deals with the second point with linked arms: in the supplier's picture, pressing the phone down onto the bottom feet draws the side arms in to grip it.
What Is in the Box
- 1 x phone holder with suction cup base ("chuck")
- 1 x air outlet accessory (vent clip)
A charging cable and a dashboard pad are not listed.
Specifications
- Type: Car phone holder, suction cup mount with vent clip option
- Material: Plastic
- Style: Universal
- Cradle: Two side clamp arms and bottom support feet, as shown in the photos
- Grip pads: Silicone anti-slip pads on the clamp arms and a silicone shock-absorbing pad at the bottom, as labelled in the supplier's picture
- Arm: Telescopic, with a pivot at the base, as shown in the photos
- Option: Chuck, with air outlet accessories (one version)
- Colour: Black
- Brand: Unbranded
- SKU: CJSJ191857702BY
The supplier does not publish the clamp opening width, the arm length or a weight limit. If you have a very large phone or a thick rugged case, ask us to check the measurement before you order.
Three Ways to Mount It
- Windshield: the classic position. The supplier describes the cup as attaching firmly to any smooth surface.
- Dashboard: works on smooth, hard, non-porous areas. Textured or soft-touch dashboards do not seal well without a mounting disc, which is not listed in this set.
- Air vent: swap the suction base for the vent clip when you would prefer the phone lower and closer.
The supplier also mentions using it on a desk or table, which makes sense for video calls at home.
Will It Hold Your Phone?
The listing says universal and names iOS and Android phones in general. In practice, check three things:
- Width with the case on. The side arms have to open wider than your phone in its case.
- Side buttons. Look at where the arms sit in the photos and compare with your phone's power and volume keys.
- Charging port. The bottom support has two feet with a gap between them, which leaves room for a cable on most phones.
How to Fit It So It Stays Put
- Clean the glass or dashboard and the suction cup with a damp cloth and let both dry.
- Press the cup flat against the surface, then close the locking lever.
- Extend the arm and set the angle before you put the phone in.
- Press the phone down onto the bottom feet so the side arms close around it.
- For the vent clip, push it fully onto a horizontal slat and check the slat can take the weight.
Position the phone where it does not block your view of the road or sit over an airbag. Many places restrict what can be fixed to the windshield, so check the rules where you drive.
Keeping the Suction Strong
Suction cups lose grip when they are dusty or when the temperature swings. If the mount starts to slip, take it off, wash the cup in warm water, let it air dry and refit it. Do not leave a phone in the holder in a parked car in direct sun. On a very cold morning, warm the glass a little with the heater before pressing the cup on.
What the Supplier Says About Build
The supplier's sales text talks about improved suction cups, durable materials and resistance to wear and corrosion, and describes the mount as tested for rough roads and sharp turns. It gives no test figures, so treat those as the maker's description. What we can see in the photos is a wide base with a lever lock, a ridged telescopic arm and padded contact points.
Who It Suits
Drivers who want one holder that works in more than one car, people who use phone navigation every day, and anyone who would rather not stick an adhesive mount to the dashboard.
Common Questions
Is the vent clip included? Yes. The supplier's packing list is the chuck and one air outlet accessory.
Does it charge the phone? No. It is a holder only.
Will it stick to a textured dashboard? Probably not well. Use the windshield or the vent clip instead.
Can I use the phone in landscape? The supplier does not say whether the cradle rotates. Ask us if this matters to you.
Buy the Windshield Car Phone Holder at Easy Life Markets
You can order the holder on this page. The current price and availability are shown on this page. Please read our return and refund policy before buying.
Related Products
Browse our phone mounts, phones and accessories and automotive accessories collections.
Product Photos
